How would I preserve candy corn to use it to decorate?

I want to use candy corn to make jewelry and for some other decorating projects. How do I preserve it like you would preserve cookies for Christmas ornaments?

I had the misfortune once of biting into a "decorative" candy corn. It looked so inviting…

Let it dry well, so that all the natural moisture is gone. Then simply spray it with clear coat craft spray. If you don’t spray it, it can get brittle, and break, and it can also get sticky when worn next to the skin. (Make sure that the spray you use is a finishing spray, so it’s not tacky when dry.)

If you want to make jewelry with some of it, I advise you to use a fairly good sized embroidery needle to make holes in it before you spray it. The clear coat may cover the holes, but they will be very easy to punch through again when you want to string it for jewerly. It’s just kind of hard to poke holes in it after it has been sprayed, as they are small objects, and very hard once dried and preserved.

Sounds like a fun idea. Good luck!

This entry was posted in preserve. Bookmark the permalink.

36 Responses to How would I preserve candy corn to use it to decorate?

  1. balls w says:

    Just leave them out until they get stale.
    References :

  2. Char says:

    Spray it with Clear Coat. Available at art supply stores or wherever spray paint is sold.
    References :

  3. seth s says:

    i think they are self preserving,dont they just get harder and harder,until there like a little stone,if you dont want them to break maybe use a clear acryllic spray.
    References :

  4. mailler_mike says:

    They are pure sugar. And sugar doesn’t get bad. Just leave them out a few days and they will harden up. Then you can set them using Clear nail polish or a craft acrylic.
    References :

  5. Xander says:

    Make sure you put some kind of varnish on it, or something that will preserve it to keep it from attracting bugs. Some people have used the same sealant that you would use to preserve oil paintings.
    References :

  6. greendaygirl486 says:

    hold them in a bag and make sure no air is left in the bag.
    References :
    my mom and i did this last year. the candy corn kept it’s flavor but they got a little hard.

  7. Cheryl E says:

    no need it is solid corn syrup and sugar is a perservative. it will last forever.
    References :

  8. Megan W says:

    You could take a needle and poke a hole in the candy corn. Then take a piece of string and slide it through.
    If you wanted to make a bracelet you do the same thing over and over again, but put them on the same string.
    References :
    smart_girl390@yahoo.com

  9. toddk57@sbcglobal.net says:

    Christy: well of all things .Let me explain about candy corn
    to do that we suggest an solution use zip lock sanwitch baggies
    they store an couple hand fulls of candy real easy.Because
    cookies will go stale with in 24hrs althought sweet stuff can get
    sticky after while so you could let them be until christmas time
    only!
    References :
    Do It Yourself(D.I.Y)

  10. Moonpie says:

    Hi Christy, my suggestion would be to find some old jewelry IE; braclets (especially the hard round one’s), necklace’s, maybe a pin or broche etc. Then use a clear coat (available at any craft/hobby store) to paint the candy corn. Let completely dry (very important) and the use a good glue (one for metal/plastic) and attach them to the jewelry. They would have a good base/structure to adhere to. Good Luck, Have Fun! Happy Halloween XOXO Moonpie
    References :

  11. Daniel S says:

    go to hobby lobby its a craft store they should have something like glue to put on top
    References :

  12. Leah M says:

    I would probably use shellac or some other clear finish. You can buy some at either a hardware store or an art supply shop. (At the art store, it would be called a "fixative.")
    References :

  13. LemonTea says:

    I’d use a clear nail polish with a label that says, "non-yellowing"; or else a craft lacquer.

    Just in case you’d rather not use real candy corn, though, another idea is you could make some with the clay in craft departments that bakes in about twenty minutes.
    References :

  14. StarShine Girl says:

    freeze it..refrigerate it.
    References :

  15. Bob E says:

    Use clear spray shellac or clear polyurethane,spray right on candy corn.Let me know what.happends.
    References :

  16. katlover31 says:

    spray or paint with clear craft sealer.
    References :

  17. ~=A7X Baby=~ says:

    Spray it with clear coat.
    References :

  18. miatalise12560 says:

    polyurethene
    References :

  19. reality says:

    depending how long you want to preserve it for…you can freeze it or place it in the refirgerator. If placing it into the freezer place in smaller amounts into a ziplock bag
    References :

  20. Teresa A says:

    go to Michaels(the arts and crafts store) they have a special type of preservative that you can use. it is in a spray can..
    References :

  21. JD says:

    i have to laugh because dang, do they even need preserving? hehe. i love candy corns so no offense intended. i’d just coat them with lacquer or something. that’d make them shiny too.
    References :

  22. werehunter says:

    You don’t need to do anything to preserve candy corn, it’s already preserved. They don’t even make candy corn anymore. It’s the same candy corn they made when I was a little guy, about a hundred years ago. They just re bag it and resell it. That candy corn you have today will be the same candy corn your great grand daughters will contemplate making into jewelry and crafts.
    A couple thousand years from now archaeologists will dig up that candy corn, ponder it, and say "I wonder if I can make jewelry or some kind of decoration out of this".
    References :

  23. Nick b says:

    nothing that stuff could survive a nuclear war
    References :

  24. Persia Prince says:

    Set it outside for a few days candy corn never gets bad then you can do anything you want with them.
    References :

  25. gathol2 says:

    I recommend spray shellac from your local hobby shop. I’ve never used it but I recall back in the day my teachers used it. A light misting on a single layer of candy. The candy could be on parchment or wax paper i expect. Maybe use a brown paper bag over a cookie sheet. Take into account the dew point for your local weather. Happy Halloween. mwah ha ha ha ha ha ha
    References :

  26. Krista D says:

    Maybe instead of using real candy corn, you could make your own out of that fimo clay stuff ( http://www.fimozone.com/ ). The candy corn shape is not that difficult to make, and this would probably be a lot stronger than real candy with varnish or something over it. Candy corn is pretty much all sugar, so if you had any area of it that was not covered in varnish (like if you wanted to put a hole through the candy corn to put it on a string) there’s a good chance that moisture would get in and the cand would crumble or the colors would run.
    References :

  27. kkid says:

    in all honesty, youd probably be better off buying fake candy corns. real ones get funky after a while.
    References :

  28. lakersfan_4life1 says:

    U DON’T!!! THAT’S CRAZY!!! U should eat candy corn not save it!!!! :(
    References :
    I love food.

  29. technical difficulties says:

    get either epoxy or some resin.. and you can use that to dip the corn in… making sure after you do that.. let it dry a tad.. then either poke holes in the center or where ever.. to make it possible to thread them if you want.. and dip them again and make sure the holes don’t close up.. get that 5 minute clear epoxy.

    also there’s spray resin.. and enamel sprays that’ll work.

    you can find it in ebay or at the hardware store.. home depot and any craft sites that have that fakey water resin for artificial plants too.

    :D
    References :

  30. Skanky Pete says:

    Clear coat them (finger nail polish or clear coat from any hardware store) or just leave them out, they don’t rot.
    References :
    Doing it before.

  31. jareihart says:

    sure spray poisons on candy….what is the up side again?
    References :

  32. leonid l says:

    You have to dry corn out
    References :

  33. boss_bitch512 says:

    Theres this stuff at Hobby Lobby that you can buy and spray on top of the candy. It’ll make it the candy all shiney and glossy and stuff!
    References :

  34. Bronwen says:

    I had the misfortune once of biting into a "decorative" candy corn. It looked so inviting…

    Let it dry well, so that all the natural moisture is gone. Then simply spray it with clear coat craft spray. If you don’t spray it, it can get brittle, and break, and it can also get sticky when worn next to the skin. (Make sure that the spray you use is a finishing spray, so it’s not tacky when dry.)

    If you want to make jewelry with some of it, I advise you to use a fairly good sized embroidery needle to make holes in it before you spray it. The clear coat may cover the holes, but they will be very easy to punch through again when you want to string it for jewerly. It’s just kind of hard to poke holes in it after it has been sprayed, as they are small objects, and very hard once dried and preserved.

    Sounds like a fun idea. Good luck!
    References :

  35. san says:

    keep them in room temp and air tight
    References :

  36. revenia s says:

    vacuum-seal the corn and store in a dark, cool and dry place
    References :
    common sense